1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
//! Blocking shared I2C bus
//!
//! # Example (nrf52)
//!
//! ```rust,ignore
//! use embassy_embedded_hal::shared_bus::blocking::i2c::I2cDevice;
//! use embassy_sync::blocking_mutex::{NoopMutex, raw::NoopRawMutex};
//!
//! static I2C_BUS: StaticCell<NoopMutex<RefCell<Twim<TWISPI0>>>> = StaticCell::new();
//! let i2c = Twim::new(p.TWISPI0, Irqs, p.P0_03, p.P0_04, Config::default());
//! let i2c_bus = NoopMutex::new(RefCell::new(i2c));
//! let i2c_bus = I2C_BUS.init(i2c_bus);
//!
//! let i2c_dev1 = I2cDevice::new(i2c_bus);
//! let mpu = Mpu6050::new(i2c_dev1);
//! ```

use core::cell::RefCell;

use embassy_sync::blocking_mutex::raw::RawMutex;
use embassy_sync::blocking_mutex::Mutex;
use embedded_hal_1::i2c::{ErrorType, I2c, Operation};

use crate::shared_bus::I2cDeviceError;
use crate::SetConfig;

/// I2C device on a shared bus.
pub struct I2cDevice<'a, M: RawMutex, BUS> {
    bus: &'a Mutex<M, RefCell<BUS>>,
}

impl<'a, M: RawMutex, BUS> I2cDevice<'a, M, BUS> {
    /// Create a new `I2cDevice`.
    pub fn new(bus: &'a Mutex<M, RefCell<BUS>>) -> Self {
        Self { bus }
    }
}

impl<'a, M: RawMutex, BUS> ErrorType for I2cDevice<'a, M, BUS>
where
    BUS: ErrorType,
{
    type Error = I2cDeviceError<BUS::Error>;
}

impl<M, BUS> I2c for I2cDevice<'_, M, BUS>
where
    M: RawMutex,
    BUS: I2c,
{
    fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
        self.bus
            .lock(|bus| bus.borrow_mut().read(address, buffer).map_err(I2cDeviceError::I2c))
    }

    fn write(&mut self, address: u8, bytes: &[u8]) -> Result<(), Self::Error> {
        self.bus
            .lock(|bus| bus.borrow_mut().write(address, bytes).map_err(I2cDeviceError::I2c))
    }

    fn write_read(&mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8]) -> Result<(), Self::Error> {
        self.bus.lock(|bus| {
            bus.borrow_mut()
                .write_read(address, wr_buffer, rd_buffer)
                .map_err(I2cDeviceError::I2c)
        })
    }

    fn transaction<'a>(&mut self, address: u8, operations: &mut [Operation<'a>]) -> Result<(), Self::Error> {
        let _ = address;
        let _ = operations;
        todo!()
    }
}

impl<'a, M, BUS, E> embedded_hal_02::blocking::i2c::Write for I2cDevice<'_, M, BUS>
where
    M: RawMutex,
    BUS: embedded_hal_02::blocking::i2c::Write<Error = E>,
{
    type Error = I2cDeviceError<E>;

    fn write<'w>(&mut self, addr: u8, bytes: &'w [u8]) -> Result<(), Self::Error> {
        self.bus
            .lock(|bus| bus.borrow_mut().write(addr, bytes).map_err(I2cDeviceError::I2c))
    }
}

impl<'a, M, BUS, E> embedded_hal_02::blocking::i2c::Read for I2cDevice<'_, M, BUS>
where
    M: RawMutex,
    BUS: embedded_hal_02::blocking::i2c::Read<Error = E>,
{
    type Error = I2cDeviceError<E>;

    fn read<'w>(&mut self, addr: u8, bytes: &'w mut [u8]) -> Result<(), Self::Error> {
        self.bus
            .lock(|bus| bus.borrow_mut().read(addr, bytes).map_err(I2cDeviceError::I2c))
    }
}

impl<'a, M, BUS, E> embedded_hal_02::blocking::i2c::WriteRead for I2cDevice<'_, M, BUS>
where
    M: RawMutex,
    BUS: embedded_hal_02::blocking::i2c::WriteRead<Error = E>,
{
    type Error = I2cDeviceError<E>;

    fn write_read<'w>(&mut self, addr: u8, bytes: &'w [u8], buffer: &'w mut [u8]) -> Result<(), Self::Error> {
        self.bus.lock(|bus| {
            bus.borrow_mut()
                .write_read(addr, bytes, buffer)
                .map_err(I2cDeviceError::I2c)
        })
    }
}

/// I2C device on a shared bus, with its own configuration.
///
/// This is like [`I2cDevice`], with an additional bus configuration that's applied
/// to the bus before each use using [`SetConfig`]. This allows different
/// devices on the same bus to use different communication settings.
pub struct I2cDeviceWithConfig<'a, M: RawMutex, BUS: SetConfig> {
    bus: &'a Mutex<M, RefCell<BUS>>,
    config: BUS::Config,
}

impl<'a, M: RawMutex, BUS: SetConfig> I2cDeviceWithConfig<'a, M, BUS> {
    /// Create a new `I2cDeviceWithConfig`.
    pub fn new(bus: &'a Mutex<M, RefCell<BUS>>, config: BUS::Config) -> Self {
        Self { bus, config }
    }
}

impl<'a, M, BUS> ErrorType for I2cDeviceWithConfig<'a, M, BUS>
where
    M: RawMutex,
    BUS: ErrorType + SetConfig,
{
    type Error = I2cDeviceError<BUS::Error>;
}

impl<M, BUS> I2c for I2cDeviceWithConfig<'_, M, BUS>
where
    M: RawMutex,
    BUS: I2c + SetConfig,
{
    fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
        self.bus.lock(|bus| {
            let mut bus = bus.borrow_mut();
            bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
            bus.read(address, buffer).map_err(I2cDeviceError::I2c)
        })
    }

    fn write(&mut self, address: u8, bytes: &[u8]) -> Result<(), Self::Error> {
        self.bus.lock(|bus| {
            let mut bus = bus.borrow_mut();
            bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
            bus.write(address, bytes).map_err(I2cDeviceError::I2c)
        })
    }

    fn write_read(&mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8]) -> Result<(), Self::Error> {
        self.bus.lock(|bus| {
            let mut bus = bus.borrow_mut();
            bus.set_config(&self.config).map_err(|_| I2cDeviceError::Config)?;
            bus.write_read(address, wr_buffer, rd_buffer)
                .map_err(I2cDeviceError::I2c)
        })
    }

    fn transaction<'a>(&mut self, address: u8, operations: &mut [Operation<'a>]) -> Result<(), Self::Error> {
        let _ = address;
        let _ = operations;
        todo!()
    }
}